Sleek Business Card Design From Scratch
In this detailed tutorial I’ll be walking you through the process of creating a cool sleek business card from scratch using Adobe Photoshop CS5. The business card when finished will be print ready, ready to send to the printer.
What We’ll Be Creating
Caution: Full sized preview is in high resolution with a file size of 14MB.
Creating The Document
Create a new document (Ctrl + N) 1042 x 676px with a resolution of 300 pixels/inch and with a color mode CMYK.
We now need to setup a couple of guides which will indicate our bleed area and safe zone area. Create a guide by going to “View > New Guide”, if you don’t see no guides appear please make sure your guides are turned on “View > Show > Guides”.
The first four guides are horizontal guides so make sure you select horizontal. You need to create horizontal guides at the following values 19px, 38px, 636px and 657px. Don’t forget the “px” at the end as leaving it out wont display anything. Next create four vertical guides with the following values 19px, 38px, 1004px and 1023px. Your canvas should look something like this.
Please note where the guides are, the main area in which you need to take good care of is the middle.
The middle area is the “Safe Zone” all content must not exceed past this guide, but the background must exceed past the safe zone for full bleeding. For more information you can always talk to your desired printing company, always check first as every company has there own way of doing things.
Creating The Background
Select your “Background Layer” make sure your foreground color is set to black #000000 and background color is set to white #ffffff, then apply the following filters “Filter > Render > Clouds”.
“Filter > Render > Difference Clouds”.
Now go to “Image > Adjustments > Invert”.
We now need to adjust the levels so go ahead and go to “Image > Adjustments > Levels” and use the following settings.
Finally, go to “Filter > Blur > Motion Blur”, use the settings below.
Create a new layer above your background layer then set your foreground color to #232323 and background color to #0c0c0c. Select the “Gradient Tool” (G) with a radial gradient.
Drag radial gradient from the middle of the canvas outwards until you have something like this.
Now set your layer blend mode to “Hard Light”. You should now have something like this.
Add The Title, Tag Line And Logo
Using the “Type Tool” (T) add your title and tag line in the middle of business card. To the right of the card add your logo, if possible add your logo inside of a circle.
Adding The Typography
Select the “Ellipse Tool” (U) then drag out an ellipse a little bit bigger than the circle around your logo.
Select the ellipse you just created from the layers window so that the path is displayed on the canvas.
Now select the “Type Tool” (T), move the cursor over the path until the cursor changes, when the cursor changes left click your mouse. Start typing your tag line, if done correctly the text should flow around the ellipse.
Once you’ve typed out your tag line you are free to delete the ellipse. If you find your text isn’t like the image above, then highlight all your text, hold down the Ctrl key on the keyboard then drag your text until you find the right position for, it can be quite temperamental at times as there aren’t any anchor points to show where the text starts and ends. Just play with it you’ll get there.
Next duplicate your text layer then press “Ctrl + T” for the “Free Transform Tool”. Drag one of the corner anchor points whilst holding down shift and alt.
Holding down Shift and Alt whilst resizing an element will resize the element from the middle inside of the sides.
Repeat the process a couple of times moving 1 font size up every time. You should have something like this.
Select a combination of words on each layer then change the color to #e63b89.
Now select a text layer and rotate it using the “Free Transform Tool” (Ctrl + T), repeat this a couple of times for one or two text layers.
Finally adjust the opacity of your text layers, adjust every other one just to add abit of contrast, I’ve set one text layer to 80% and one layer to 70%.
That’s the front of the card complete, save your PSD file then save another copy, the copy will be the card back.
Creating The Card Back
Delete your title, logo and tag line layers then replace them with your name and details.
Select all your text layers that were around the logo, then set the opacity to 20%. Finally press Ctrl + T for the “Free Transform Tool”, once you have the “Free Transform Tool” (Ctrl + T) enlarge the text, when dragging the anchor point hold down the shift key.
Holding down Shift whilst dragging will keep the element in proportion.
Your business card is now complete, if you would like to display your business card like i have in my preview image then download the Business Card Mock-Up Display from the link below.
Once you’ve finished you should have something like this.
Thanks for taking part in this tutorial, maybe you could share some of your results by posting them below.
Download Source File
License and Attribution:
This file is licensed under the Creative Commons license. Attribution is required and always appreciated. Thanks.
Give Us Your Feedback
Here on Photoshop Plus we use something called Gravatar, its a little image which will appear next to your name when you comment on a blog. Using a gravatar will help us recognise genuine comments from the spam comments.
Don't forget to leave a comment on this post, we appreciated your feedback good or bad.